Controls; Switching The Appliance On; Operating Tips - Gaggenau RT 222 Mode D'emploi

Controls

5
On/Off button ÿ
1
Serves to switch the whole appliance on and off.
"Fast" button Û
2
Switches "fast" function on and off (see chapter
"Fast" function).
3 Temperature setting buttons +/-
The temperature is set with these buttons.
4 Temperature display
The numbers correspond to the set refrigerator
compartment temperatures in °C.
Alarm button Ú
5
Used to switch off the warning signal, (see
chapter "Alarm function").

Switching the appliance on

Switch on the appliance with the On/Off button ÿ .
The temperature display indicates the set
temperature.
The appliance begins to cool. Light is switched on
when the door is open.
We recommend a factory setting of +4 °C in the
refrigerator compartment.
Do not store perishable food warmer than +4 °C.
4 3 2

Operating tips

▯
▯
After the appliance has been switched on, it may
take several hours until the set temperature has
been reached.
Do not put any food in the appliance beforehand.
While the refrigeration unit is running, water
droplets or hoarfrost may form at the rear panel of
the refrigerator. This is due to functional reasons.
It is not necessary to scrape off the frost or wipe
off the water droplets. The rear panel defrosts
automatically. The condensation collects in the
drainage channel and is carried to the
refrigeration unit where it evaporates.
1
27