Viscount Vivace 60 Deluxe Mode D'emploi page 48

Viscount Vivace 60 Deluxe - 60 - 50 Deluxe
Vivace 60 and 50 Deluxe
MIDI MIDI MIDI
S
P I
3 9
1. General combinations: this section contains the instrument's general adjustable combinations.
When a combination is recalled, the light of the relative stop illuminates to confirm its activation.
The [NEXT] pistons can also be used to select combinations one by one in an upward direction and
[PREV.] for the same function in a downward direction (combination sequencers).
2. Dedicated combinations (Vivace 60 Deluxe only): the Vivace 60 Deluxe also has six dedicated
adjustable combinations for the Man.II (2A), the Man.I (2B) and the pedal board (2C). When a
combination is recalled, the light of the relative piston illuminates to confirm its activation.
In dedicated combinations, the user is only able to set the configuration of the section associated to
the selected combination.
There is also a piston marked [HR] (Handle Registers) beside the general and dedicated combinations;
also known as 0, when it is on it automatically memorises the register status. This piston's main
function is to restore, during use of the combinations, the "hand-made" stop setup created when the
[HR] button was on. Remember that an HR setup is not modified if the stops are switched on and off
by hand when a combination on the same section is selected (i.e. with the HR off).
N.B.
The contents of the HR are not retained when the organ is switched off.
Each combination (including HR and Tutti), whether general or sectional, is able to store:
- the status (on/off) of the stops
- the status of the couplers (enabling saving, see point 6.9)
- the status of the tremulants (even with different modulation depths and speeds, if the specific
SET-UP menu function described in par. 6.9 is activated)
- the style (Organ Style)
- the MIDI controls (point 9) and the Program Changes set using the SEND PROGRAM
CHANGE function (par. 7.2)
The Enclosed and Automatic Pedal can also be saved in the general memories and HR and in the Tutti
only, by activating the specific function, see par. 6.9.
For the fixing combinations procedure, see point 3.
3. [S] piston: "Set" (or fix) function used for fixing combinations. To fix a combination, simply press
the [S] piston, keep it pressed and then press the combination you wish to fix, which may be dedicated,
general or Tutti.
PREV NEXT HR
II
4
1 2 3 4 5 6
1
46
Owner's Manual
Vivace 60
A.P ENC T
8 5 6
C
10