Avintage AVI24PREMIUM Notice D'utilisation page 45

A. Install your wine cellar into the kitchen cabinet, having first checked that the dimensions
correspond exactly to those indicated on the installation drawing.
B. Once your wine cellar properly positioned into the kitchen cabinet, please adjust it as close as
possible to the edges of the kitchen cabinet. Make sure that your appliance is flushed with
the kitchen cabinet in order to ensure a functional push-pull opening system.
C. Once black mounting bars are installed as close as possible to the edges of the kitchen cabinet,
test the push-pull system to open and close the door. Once the test is successful, please screw the
upper fixing bar and the lower one (2 screws at the top / 2 screws at the bottom) in order to
correctly install your wine cellar.
Improper installation of your appliance will not allow the push-pull system to function
properly to open or close the door. Make sure to follow the instructions above.
Opening and closing push-pull system
Press the opening zone and wait for a few seconds before the opening system can trigger. This is
normal that there is a delay between pressing the upper left zone of your wine cellar and the moment
the door opens.
In addition, and as shown in the following drawing, the system can be adjusted a few millimeters by
screwing or unscrewing it to allow the door to be properly closed and opened. However, be careful not
to unscrew it too much because door gasket must remain sealed when the wine cellar is closed to
have a door perfectly hermetic.
A non-hermetic door gasket caused by an improper push-pull system adjustment can
lead to frost or even freezing at the fan.
45