Operating Your Refrigerator; Freezer Temperature Control; The Freezer Compartment - Danby DFF100C1BSLDB Guide D'utilisation Et Soins De Propriètaire

Masquer les pouces Voir aussi pour DFF100C1BSLDB:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Operating Instructions
OPERATING YOUR
REFRIGERATOR
Temperature
Température
Fig. 2
Fig. 3
OPERATING
FREEZER
COMPARTMENT
MIN
Fig. 4

Freezer Temperature Control

REFRIGERATOR TEMPERATURE CONTROL
• There is a digital temperature display panel in the REFRIGERATOR
compartment (See Fig.2.). The digits on the upper line are in degrees
Celsius, while the bottom digits are in degrees Fahrenheit.
• Press the "-" sign or "+" sign to reach the desired temperature.
• The first time you turn the unit on, please select 2°C/36°F and let the
unit run for at least 2 hours before putting food inside. This will ensure
the refrigerator compartment is thoroughly chilled before food is put in.
The recommended factory setting is 4°C / 39°F.
NOTE:
• If the unit is unplugged, you must wait 3 to 5 minutes before restarting
the unit (plugging the unit back in). If you attempt to restart before 3 to 5
minutes, the refrigerator will not start.
• If the power goes out, the unit should restart itself when the power
comes back on.
• Large amounts of food will lower the cooling efficiency of the appli-
ance.
• Do not place food so that it blocks an air vent, and leave adequate
space between food items for air flow in the cabinet
• Allow several hours for temperature to stabilize between two tempera-
ture selections.
• Selecting different temperatures on the refrigerator digital temperature
display, will affect the temperature in BOTH the fridge and the freezer
compartments.
FREEZER TEMPERATURE CONTROL
• Your refrigerator has one vent control for regulating the temperature in the
freezer compartment (See Fig.4.). The temperature control is located on the
center of the freezer compartment's interior back panel.
• The first time you turn the unit on, adjust the temperature control knob to
"MAX" and let the unit run for at least 2 hours before putting food inside. This
will ensure that the freezer cabinet is thoroughly chilled before food is put in.
• The FREEZER temperature control ranges from "MIN" (the warmest) to
"MAX" (the coldest). Adjust this control to get the desired temperature. The rec-
MAX
ommended factory setting is MEDIUM (half way between "MIN" and "MAX").

THE FREEZER COMPARTMENT

• This compartment is designed for the long-term storage of frozen food.
Storage time period is up to three months.
• The storage life of frozen foods varies and the recommended storage time
should not be exceeded.
• Place frozen food into the freezer as quickly as possible after purchase. If
there are instructions on the package, carefully follow these instructions
regarding storage times.instructions regarding storage times.
6

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dff100c1wdbDff100c1bdb

Table des Matières