Volume Adjustment; Selecting A Source - Pioneer AVD-W6200 Mode D'emploi

Basic Operation

Volume Adjustment

Adjust the volume of audio output from the built-in speaker.
• Raise or lower the speaker volume.
The volume of the built-in speaker can be adjusted in a range of 0 to 30. (The volume level
will be displayed for about 4 seconds.)

Selecting a Source

• Select the desired source.
Each press of the SOURCE button selects the desired source in the following order:
[VIDEO1] = [VIDEO2] = Exit to [VIDEO1]
Note:
• [VIDEO1] and [VIDEO2] are audio and video from the AV equipment connected to the VIDEO1
or VIDEO2 input terminal. (Refer to page 23.)
• Verify the correct connection with the AV equipment connected to VIDEO1 or VIDEO2.
13
VOL
12
VIDEO1