Basic Operation; Turn On Power; Volume Adjustment - Pioneer AVD-W6210 Mode D'emploi

Basic Operation

Turn On Power

Remember to start the car engine before turning on the power to preserve battery life.
1. Start the car engine.
2. Turn on the system.
Press the SOURCE/POWER button.
To turn off the system, press the SOURCE/POWER button and hold for 2 seconds.

Volume Adjustment

Adjust the volume of audio output from the built-in speaker.
• Raise or lower the speaker volume.
The volume of the built-in speaker can be adjusted in a range of 0 to 30. (The volume level
will be displayed for about 4 seconds.)
11
AV I N 1 + GUIDE
VOL
12