Wittur WSG-T0.1 Instructions De Service page 81

Mechanical installation
4. Screw self-locking nuts (12.8) onto the stud bolts and tighten them until the dimension "s" has been set.
NOTICE
Before setting the dimension "s", it is imperative that the air gap "s
to "s
Abb. 13 Dimension "s"
1.1 Stator, complete
2
Type
BFK464-17S
BFK464-18S
BFK464-18S.2
BFK464-19S
BFK464-20S
BFK464-20S.1
BFK464-22S
BFK464-25S
BFK464-25S.1
BFK464-28S
INTORQ | BA 14.0197 | 04/2016
" ( 16), if required. The brake is not energised during adjustment.
LN
Armature plate
s
LN
DANGER
Brake may fail
If the manual release is not adjusted correctly the brake may fail.
Possible consequences:
❚ Severe injuries or material damage.
Protective measure:
❚ Ensure that the dimension "s" is observed.
6 Flange
+0.05
[mm]
0.4
0.5
" is checked, and adjusted
L
12.1 Lever
+0.1
s [mm]
5.3
6.5
5.3
6.5
30