Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Technical specifications
3
Technical specifications
3.1
Product description
Versions
Abb. 1
Design of the BFK464-
1.1 Stator
1.2 Pressure springs
2
3
4
3.1.1
General information
The spring-applied brake is designed for converting mechanical work and kinetic energy into heat energy.
Due to the static braking torque, loads can be held at standstill. Emergency braking is possible at high speed
of rotation. The wear increases as the switching energy increases (operating speeds
The BFK464 spring-applied brake is a single-disk brake with two friction surfaces. The braking torque is ap-
plied through two separate braking circuits, both electrical and mechanical, via several compression springs
(1.2) in the form of generated friction. The brake circuits are released electromagnetically. Due to its division
into two brake circuits, the brake is particularly suitable for applications such as lift systems and stage/plat-
form technology. The brake can be selected based on the rated torque for one brake circuit. The second
brake circuit meets the requirement for redundancy.
INTORQ | BA 14.0197 | 04/2016
S / S.1 / S.2 spring-applied brake
Armature plate
Complete rotor
Hub
5
Shaft
6
Flange (optional)
8
Coil
9
Sleeve bolts
10 Socket head cap screw, DIN EN ISO
4762
13 Cover plate (optional)
16 Microswitch
18 Silencer (optional)
18).
13
Publicité
Chapitres
Table des Matières
