Recording Mode - Hama Airdevil Mode D'emploi

7.7 Switching off the drone
• Land the drone.
• Press the Stop button (9) on the remote control to switch
off the rotors.
• Move the slide switch (8) on the drone to the OFF
position.
• Press the on/off switch (5) to switch off the remote
control.
8. Camera
Note
• When using the camera, observe the legal regulations
and limitations specified in Sections 4 and 5, as well
as the allowed operating environment for drones!

8.1 Recording mode

• Insert a microSD card into the appropriate slot (9) on the
drone.
Video
• Push the Photo/video button (3) on the remote control
upwards to start a video recording. The drone's LED
indicator (6) flashes during recording.
• Push the Photo/video button (3) upwards again to exit
the video mode. The drone's LED indicator goes out.
Picture
• Push the Photo/video button (3) on the remote control
downwards to take a picture.
8.2 Retrieving the recorded material
• Remove the camera's microSD card.
• Connect the microSD card to your PC using the SD card
reader.
• Transfer the image material to your PC to free up storage
space on the camera.
• Delete the pictures/videos on the camera directly on your
PC.
9. Changing the rotor blades
• Undo the screw of the rotor blade with the included
screwdriver.
• Remove the existing rotor blade.
• Place the new rotor blade on the motor shaft. Make
sure that the rotor blades are mounted as shown in
the diagram, as otherwise the rotation direction will
not be correct and no drive is generated.
• Secure the rotor blade using the included screwdriver.
Pink A
Blue A
Pink B
Blue B
12