Important Safety Information; Electrical Requirements; Important Warning; Installation Instructions - Danby DFF100A2WDB Guide D'utilisation Et Soins De Propriètaire

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of
electrical shock by providing an escape wire for the electrical current.
ELECTRICAL
REQUIREMENTS

Installation Instructions

This appliance is equipped with a cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet that is properly
installed and grounded.

IMPORTANT WARNING

An empty refrigerator is a very dangerous attraction to children.
Remove either the gasket or lid from unused appliances, or take
some other action that will guarantee it harmless.
Improper use of the grounding plug can result in a risk of electric
shock. Consult a qualified electrician or serviceman if the ground-
ing instructions are not completely understood, or if doubt exists
as to whether the appliance is properly grounded.
DO NOT USE AN EXTENSION CORD
Use an exclusive wall outlet. Do not connect your refrigerator to exten-
sion cords or together with any other appliance in the same wall outlet.
DANGER:
Risk off child entrapment. Before you throw away your old
refrigerator or freezer:
• Take off the doors.
• Leave the shelves in place so that children may not easily climb in.
DON'T WAIT DO IT NOW!
Remove exterior and interior packings, wipe the outside thoroughly with a
soft dry cloth and the inside with a wet, lukewarm cloth. Avoid placing the
unit in a narrow recess or near any heat source, direct sunlight, or mois-
ture. Let air circulate freely around the unit. Keep the rear of the
refrigerator 5 inches away from the wall.
LOCATION
1) Select a place with a strong, level floor.
2) Allow 5 inches of space between the back of the refrigerator and any
adjacent wall.
3) Avoid direct sunlight and heat. Direct sunlight may affect the acrylic
coating. Heat sources nearby will cause higher electricity consumption.
The refrigerating system in this refrigerator is a "Frost Free" system. This
type of system requires no user intervention (i.e. defrosting) other than
selecting required cooling temperatures and the usual care and
maintenance.
To avoid vibration, the unit must be set level. This is accomplished by
adjusting the (2) front leveling legs, located under the refrigerator. To
begin the cooling process, turn the graduated dial to the desired
temperature. The minimum cooling setting is 1, and the maximum setting
is Max. We recommend setting the thermostat at 4, our medium setting,
and adjust as required.
3
WARNING

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Dff100a2bsldb

Table des Matières