Belling SE 90 DFT INOX Manuel D'utilisation page 87

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

When the timer reaches zero an audible
warning will sound and the symbol
flash. Press any key to stop the audible
warning. The symbol will disappear but
the oven will continue to operate. Use the
switch and oven control to turn the oven off.
Sound Adjustment
To alter the signal beep, while the timer
shows the time of day press and hold the
´-` button for 1-2 seconds until an audible
signal beep sounds. After that each time the
´-` button is pressed a different signal beep
is sounded. There are three different types
of signal beep. Select the desired signal
beep and do not press any other buttons.
After a short time, the selected signal beep
will be saved.
Deep Tray
The deep tray is used when cooking stews.
To locate the tray correctly in the cavity, put
it to any rack and push it up to the end.
Flap Drawer
Your appliance has a drawer to store
accessorries like trays, shelves, grids, small
pots and pans.
2. Select the desired
time period using the -
and + keys while
flashing.
3. The symbol
lights continuously, the
time is saved and the
warning is set.
will
WARNING: The inside surface of
drawer may become hot during use.
Do not store any food, plastic or
inflammable materials in the drawer.
is
Grill Pan and Handle Set
The grill pan set is used when grilling
steaks, etc.
WARNING: The grill pan has a
detachable handle. Make sure when
using the grill pan handle that it is
centralised and secure as shown in the
figure. Do not leave the handle in position
when grilling.
Wire Grid
The wire grid is used when grilling or
processing food in other containers.
WARNING: The wire grid is used
when grilling or processing food in
other containers.
EN - 20

Publicité

Table des Matières
loading

Table des Matières