Meaning Of The Led Indicator (2) - Sygonix 1911204 Notice D'emploi

• Connect the other end of the cable to the USB-A socket on
the power adapter.
• Connect the mains plug on the power adapter to a standard
mains socket.
• Wait until you hear a voice prompt indicating that the system
is starting up (approx 30 seconds). The LED will show red.
• A second voice prompt will indicate when startup is complete.
The LED will start to flash rapidly. It will change to blue when
the startup is complete. If this does not happen, refer to sec-
tion d) "Resetting the device". The LED will show constant
blue.
The blue LED (2) indicates that the device is receiving
power.
• You can now connect to and configure the camera using the
"Smart Life" app. Refer to the app instructions for details.
c) Meaning of the LED indicator (2)
Constant red LED.
Rapidly flashing red LED.
Constant blue LED.
Rapidly flashing blue LED.
40
The camera is starting up or
there is an error.
The camera is ready for a
network connection.
The camera is functioning
normally.
The camera is connecting to
a network.