Scope Of Delivery; Parts Overview - Bresser ClimaTemp TB Mode D'emploi

The manufacturer is not liable for damage related to improperly
installed batteries!

SCOPE OF DELIVERY

(Fig. 1)
Main unit (A), remote sensor (B), power plug (C), button cell (3V,
CR2032 type) (D), instruction manual
Required batteries (not included with purchase):
2 pcs. Mignon bateries (1.5V, AA/LR6 type)

PARTS OVERVIEW

Main station (Fig. 2)
1. SNOOZE button
2. LCD
3. ALARM button
4. CHANNEL (UP) button
5. MAX/MIN (DOWN) button
6. TIME button
7. HISTORY button
8. LOOP button
9. RAINBOW button
10. TUNE button
11. SENSOR button
12. RCC button
8
13. OUTDOOR TEMP button
14. RESET knob
15. °C/°F slide switch
16. OFF/LO/HI slide switch
17. Loudspeaker
18. Power jack
19. Battery compartment
Remote sensor (Fig. 3)
20. Red LED indicator
21. LCD
22. Mounting base
23. RESET button
24. CH Channel slide switch
25. Battery compartment
BEFORE YOU START
IMPORTANT!
1. Establish the power supply for main station before doing so for
the remote sensor.
2. Place the main station as close as possible to the remote sensor.
3. Position the remote unit and main unit within the effective
transmission range.