Snooze Function; Weather Forecast - Bresser ClimaTemp TB Mode D'emploi

the symbol. LCD returns to normal time mode automatically
after a few seconds.
NOTE!
The alarm will be automatically turned on when the
is displayed.

SNOOZE FUNCTION

1. If no key is pressed during the alarm period, the alarm will
turn off automatically.Alarm beeping lasts for 2 minutes.
2. Press [ SNOOZE ] button to stop the current alarm and enter
snooze. Alarm icon will be flashing continuously. The alarm
will sound again in 5 minutes. Snooze can be operated
continuously in 24 hours.
3. Press and hold [ SNOOZE ] button for about 2 seconds to
turn off the alarm.

WEATHER FORECAST

The indoor console contains a built-in sensitive pressure sensor
to predict the weather forecast for the next 12 hours:
Symbol
Weather
sunny cloudy
trend
symbol
partly cloudy rainy snowy
DISPLAY COLOR CHANGE
1. Press [ LOOP ] key to activate the automatic color change.
Display changes continuously between 256 colors.
2. Press [ LOOP ] key again to disable color change function.
Press [ RAINBOW ] key several times to select a color from
the following and display it permanently:
white > red > orange > yellow > green > light-blue > deep blue
> purple
3. Press [ LOOP ] key again to disable color change function.
Press and hold [ TUNE ] key to run through the complete
spectrum with its 256 colors. Release the [ TUNE ] key when
reaching the desired color. This color will then be displayed
permanently.
4. Press [ LOOP ] key again to disable color change function.
Press [ OUTDOOR TEMP ] key to run display color change
depending on the outdoor temperature. The display color
changes regarding to the values in the table below:
Temperature Color
range
under -20.0° C darkblue
-19.9° to -11.0° C lightblue 1
-10.9° to -5.0° C lightblue 2
Temperature Color
range
16.1° to 20.0° C orange 2
20.1° to 24.0° C orange 3
24.1° to 28.0° C red 1
11