Facom NS.3500G Notice Originale page 10

• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, rubber-coated or metal reinforced gloves, gloves with cut or frayed fingers, jewelry or long hair can be
caught in moving parts.
• Keep hands and other body parts, loose clothing and long hair away from the moving end of tool.
• Anticipate and be alert for sudden changes in motion during start up and operation of any power tool.
• Operators and maintenance personnel must be physically able to handle the bulk, mass and power of the tool.
• Do not operate this tool for long periods of time. Vibration caused by tool action may be harmful to your hands and
arms. Hold the tool with a light but safe grip, taking account of the required hand reaction forces. Stop using any tool if
discomfort, tingling feeling or pain occurs. Seek medical advice before resuming use.
• This tool is not insulated against electric shock, contact with a live wire will make exposed metal parts live.
• Due to dust generated while using tool, a risk assessment and the imple mentation of appropriate controls for these
hazards are essential.
• Accessories and tools can get hot during operation. Wear gloves when touching them. Ensure the tool is off when
changing accessories.
• Keep bystanders a safe distance away from work area. Anyone entering the work area must wear personal protective
equipment. Fragments of workpiece or of a broken accessory may fly away and cause injury beyond immediate area
of operation.
• Never direct air at yourself or anyone else or serious personal injury may result.
• Wear warm clothing whenever working in cold conditions and keep your hands warm and dry.
• Whipping hoses can cause severe injury. Always check for damaged or loose hoses and fittings.
• Avoid prolonged contact with dust from power sanding, sawing, grinding, drilling, chipping and other construction
activities. Wear protective clothing and wash exposed areas with soap and water. Allowing dust to get into your mouth,
eyes, or lay on the skin may promote absorption of harmful chemicals.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Do not let children come in contact with this tool. Supervision is required when inexperienced operators use this tool.
• Do not modify this tool. Modifications can reduce the effectiveness of safety measures and increase the risks to the
operator.
• Do not discard the safety instructions; give them to the operator.
• Do not use the tool if it has been damaged.
• Be aware that the failure of the workpiece or accessories, or even of the tool itself, can generate high-velocity
projectiles.
• This product is not intended for use by persons (including children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills unless they are supervised by person responsible for their
safety. Children should never be left alone whith this product. This tool and its accessories must be used in
compliance with these instructions. Using it for any other purpose may cause a risk of danger for people and the
environment.
• Only qualified and trained operators should install, adjust or use the tool.
• For overhead work, wear a safety helmet.
• Direct the exhaust so as to minimize disturbance of dust in a dust-filled environment. Do not direct exhaust air towards
hands.
• Where dust or fumes are created, the priority shall be to control them at the point of emission.
• All integral features or accessories for the collection, extraction or suppression of airborne dust or fumes should be
correctly used and maintained in accordance with the manufacturer's instructions.
• Do not free run tool with socket installed on tool.
• Do not splash or immerse in water or other liquids.
• Do not incinerate even if severely damaged or completely worn out. The battery can explode in a fire. Toxic fumes and
materials are created when lithium ion batteries are burned.
• If battery contents come into contact with the skin, immediately wash area with mild soap and water. If battery liquid
gets into the eye, rinse water over the open eye for 15 minutes or until irritation ceases. If medical attention is needed,
the battery electrolyte is composed of liquid organic carbonates and lithium salts.
• Contents of opened battery may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical
attention.
• Burn hazard. Battery liquid may be flammable if exposed to spark or flame.
• Fire hazard. Never attempt to open the battery pack for any reason. If the battery pack case is cracked or damaged,
do not insert into the charger. Do not crush, drop or damage the battery pack. Do not use a battery pack or charger
that has received a sharp blow, been dropped, run over or damaged in any way (e.g., pierced with a nail, hit with a
hammer, stepped on).
• Please note that changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate the equipment.
WARNING: Never modify the unit or any part of it. Damage or personal injury could result.
CAUTION: Do not stare into LED light. Serious eye injury could result.
3 - ADDITIONAL SPECIFIC SAFETY RULES FOR IMPACT WRENCHES
• Use only impact rated accessory sockets and extensions recommended by FACOM. Inspect accessories before use.
Do not use cracked or damaged accessories. Do not use chrome sockets , hand sockets or any other accessories not
rated for impact use.
NU-NS.3500G-NS.3100G-NS.2500G_0118.indd 10
10
08/01/2018 08:10:24