Publicité
cC
Do not use the tilt support lever/knob
when trailering the boat. The outboard
motor could shake loose from the tilt
support and fall. If the motor can not be
trailered in the down position, use an
additional support device to secure it in
the up position.
EMU01797
STORING OUTBOARD MOTOR
When storing your Yamaha outboard
motor for prolonged periods of time (2
months or longer), several important pro-
cedures must be performed to prevent
expensive damage. This is especially
important for your oil injection-equipped
outboard motor due to the lean oil ratios
used at idle prior to shutting the engine
off for the season. It is advisable to have
your outboard motor serviced by an
authorized Yamaha dealer prior to stor-
age. However, the following procedures
can be performed by you, the owner, with
a minimum of tools.
cC
8 Do not use any chemical goods con-
taining Silicon, Phosphorus, or Lead.
Otherwise the oxygen sensor for the
Electronic Fuel Injection system could
be damaged. Consult your Yamaha
dealer for details on the use of chemical
goods for storage.
8 Drain the remaining gasoline from the
vapor separator. Gasoline left in the
vapor separator for a prolonged period
of time will break down and could
cause damage to the fuel line.
000288
4-4
GB
Publicité
Chapitres
