Lighting Fixture - Nordcap TKU 407 G Mode D'emploi

13. Fit the accompanying left-side
top hinge. Tighten the tosion spring
approx. 1/2 turn (anticlockwise on
left side, clockwise on rigth.)
16. Retighten the top panel
screws using a screwdriver.
18. After reversing the door, it is important to check that the sealing strip provides a tight seal
all the way round. If it does not, carefully heat the strip all the way round using a hair dryer.
Then ease the strip outwards slightly so that it forms a tight seal against the cabinet. Be care-
ful not to heat the strip so much that it melts!
Lighting fixture.
1.Pull the screen to the left.
2.Pull down the right side of the screen and
take it out.
3. Remove the strip - possibly with text - by
pulling it out of the tracks along the whole
length of the profile.
4.The fluorescent tube can now be replaced.
5.The mounting is performed in reverse
order
.
The glow switch can be replaced without
remo ving the screen.
14. Secure the top hinge in
posision..
17. Refit the lock housing and
lock pin.
7
15. Raise the appliance into
uppight possion. Click the top
panel into place (it is secured in
three places.)
GB DK