Husqvarna 115iHD55 Manuel D'utilisation page 8

• Disconnect the plug from the power source and/or
the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
• Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tool´s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.
in accordance with these instructions, taking into
account the working conditions and the work to
be performed. Use of the power tool for operations
different from those intended could result in
hazardous situations.
Battery tool use and care
• Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used
with another battery pack.
• Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
• When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that
can make a connection from one terminal to
another. Shorting the battery terminals together may
cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritations
or burns.
Hedge trimmer safety warnings -
Personal safety
• Use both hands when operating the hedge trimmer.
Using one hand could cause loss of control and result
in serious personal injury.
• Keep all parts of the body away from the cutter
blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the
switch is off when clearing jammed material.
8 – English
GENERAL SAFETY PRECAUTIONS
Blades coast after turn off.A moment of inattention
while operating the hedge trimmer may result in
serious personal injury.
• Carry the hedge trimmer by the handle with the
cutter blade stopped. Carry the hedge trimmer by
the handle with the cutter blade stopped. Carry the
hedge trimmer by the handle with the cutter blade
stopped.
• Hold the power tool by insulated gripping surface
only, because the cutter blade may contact hidden
wiring. Cutter blades contacting a "live" wire may
make exposed metal parts of the power tool " live" and
could give the operator an electric shock.
• DANGER -Keep hands away from blade. Contact
with blade will result in serious personal injury.
• Check the hedge for foreign objects, e. g. wire fences.
IMPORTANT!
Always disconnect the battery before any maintenace
on the machine.
Children should be supervised to ensure that they do
not play with the appliance.
Store the machine out of reach of children. Never allow
children or other persons not trained in the use of the
machine and/or the battery to use or service it. Local
laws may regulate the age of the user.
Never use a machine that has been modified in any way
from its original specification.
Wear personal protective equipment. See instructions
under the heading "Personal protective equipment".
The operator of the machine must ensure, while
working, that no persons or animals come closer than
15 meters (50 ft.).
Never use the machine in bad weather, for instance in
fog, in rain, strong winds, intense cold, etc. Extremely
hot weather may cause overheating of the machine.
Never use a machine that is faulty. Carry out the safety
checks, maintenance and service instructions
described in this manual. Some maintenance and
service measures must be carried out by trained and
qualified specialists. See instructions under the heading
Maintenance.
Do an overall inspection of the machine before use, see
maintenance schedule.
Have your power tool serviced by a qualified repair
person unsing only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.