This appliance can be operated by remote control and onboard buttons, however
onboard buttons have limited functions. A beep should be heard when the power is
first applied.
1. ONBOARD BUTTONS
The onboard buttons are located under the trim on the top left.
Heater
Press the Flame button to turn on/off the flame LED and cycle through flame
brightness levels High/Medium/Low.
Press the Heater button to turn on/off the heater and cycle through heat levels
High/Low. Heat level is indicated by the Heater Indicator light.
Red Indicator: High heat
Blue Indicator: Low heat
Indicator Off: Heater off
2. WIFI CONFIGURATION
The Cascade series is controllable via Dynasty Fireplaces' own smartphone
app for Android and iOS. Download the Dynasty app, and signup for an
account with your email, and connect your fireplace. To download the app,
visit:
For more information on WiFi setup, and connecting to voice-assistants
visit: support.dynastyfireplaces.com
WIFI SETUP
© 2020 Dynasty Fireplaces | V 1.0.0
Flame
dynastyfireplaces.com/download
Heater Indicator
WiFi Indicator
Timer
Indicator On: Heater timer is set
- 13 -