Power Options - Dynasty Fireplaces DY-BTX42 Manuel D'installation & D'utilisation

Carefully spread the small clear and semi-painted crystal stones across the fuel bed.
Arrange the logs and place the small semi-painted and clear crystal stones in between
the log layout.

POWER OPTIONS

Plug-in
You may run the power cord out of the framed wall opening to an existing outlet or
install an outlet on a nearby wall stud within the wall).
reach the outlet, a grounded extension cord minimum AWG No. 14 wiring and rated to
a minimum or 1875 watts may be used.
Hard-wire
A qualified electrician may remove the cord connection and wire the appliance directly
to the house hold wiring. The appliance must be electrically connected and grounded
in accordance with local codes.
FIREPLACE REPAIR GUIDES
© 2020 Dynasty Fireplaces | V 1.0.0
If the cord is not long enough to
- 11 -