Installation - Opus Technologies DCL20-SA Manuel D'installation Et D'utilisation

DCL20-SA | Manuel d'installation et d'utilisation | Installation and user manual |

3. Installation

For magnetic field to radiation in the room, the
loop can be placed on the floor.
The loop can be placed in the slab (on the wire
mesh), under a coating (parquet, carpet, ... etc)
using a copper tape or glued under a carpet of
soil. See figure 1
Amplifier
The distance between the loop and the distance
between the loop and the periphery can be cal-
culated to avoid the emergence of the magnetic
field .
The loop can also be placed on the roof, behind
a false ceiling for example.
Loop
Figure 1
Amplifier
Loop
Figure 2
Note:
Other installations are possible on a case by
case basis. We can help you with our exper
tise and custom modeling software.
18