Kicker Bullfrog Série Manuel D'utilisation page 8

Double-Kick Status:
Double-Kick mode is indicated by one of two LED patterns across the Battery Status LEDs,
depending on if the Bullfrog is in Primary mode or Secondary mode.
These indicators will only be in effect while establishing the connection between Bullfrog's.
Primary Bullfrog Sequence Secondary Bullfrog Sequence
1 2 3 1 2 3
Auto Turn-off:
If no audio is detected for 10 minutes, the Bullfrog will turn off automatically while in
Bluetooth and AUX modes. Auto Turn-off is disabled while using the USB Charge Bank, or
when charging. The Bullfrog will enter OFF mode after 1 hour. It must be turned back on for the
KICKER Connect App to work.
Hardware Reset:
A hardware reset allows the speaker to recover from unexpected issues. If the speaker
becomes unresponsive, momentarily press the reset button on the side of the speaker using a
paperclip.
Factory Reset:
Factory reset restores the speaker back to the way it was shipped to you. This can be useful
to reset the equalizer and volume levels to default, and can help resolve issues with Bluetooth,
FM radio, or with the Kicker Connect app. To perform a factory reset, turn the speaker on and
press and hold the Play button for 10 seconds, or until the LEDs turn off.
7