Kicker Bullfrog Série Manuel D'utilisation page 5

Connections
The KICKER Bullfrog has multiple hardware connections to
accommodate any audio application, indoors and outdoors.
Peel back the protective covering located on the side of the Bullfrog to
access the hardware panel. Remember to replace it when
fi nished. When operating near water or other risky areas, you are solely
responsible for maintaining the water-resistant integrity of the Bullfrog. All
connections should be removed and the cap should be tightly secured.
Bullfrog Charge - USB charging input using included USB
cable. Charge using an existing USB power supply,
computer or other external device with charge bank. 2.1A
for optimal charge time.
4
Hardware reset
Line In - Provides audio input via 3.5mm connection
with AUX input mode.
USB Charge Bank - The USB Type A connection on the
Bullfrog acts as a power bank to charge your external
devices when the Bullfrog is on, or power is connected.
It is also used to update the fi rmware. Charging current
up to 2.1A.