Timer; Control Panel Locking - CONTINENTAL EDISON CECP502RP Notice D'utilisation

Timer

The timer is able to be used simultaneous with all 2 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the cooking time :
Action
Zone selection
Increase power
To select « Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
The time is confirmed and the cooking starts until the time reaches [ 00 ].

To stop the cooking time :
Action
Zone selection
To select « Timer »
To stop the « Timer »
If several timers are activated repeat the process.

Automatic stop at the end of the cooking time :
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.

Egg timer function :
Action
Activate the hob
Select« Timer »
Decrease the time
Increase the time
After a few seconds the control light stops with blinking.
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press any key.

Control panel locking

To avoid modifying a setting of cooking zones , in particular with within the framework of cleaning
the control panel can be locked (with exception to the On/Off key [
 Locking :
Action
Start
Hob locking
Control panel
Press selection key from the zone
Press key [ + ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press selection key from the zone
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Control panel
Press key [ ]
Press simultaneously [ - ] and [ + ]
Press key [ - ]
Press key [ + ]
Control panel
Press key [ ]
Press simultaneously [ - ] and
selection key from the front zone
Repress selection key from the
front zone
21
Display
[ 0 ]
[ 1 ] ... [ 9 ] [ P ]
[ 00 ]
[ 00 ] wents to 30,29....
time increase
Display
[ 0 ]
The remaining time
[ 00 ] then stops
Display
[ 0 ] or [ H ]
[ 00 ]
[ 00 ] wents to 30,29....
time increase
]).
Display
[ 0 ] or [ H ]
[ 0 ] or [ H ]
2 x [ L ]