Starting-Up; Pan Detection; Residual Heat Indication; Booster Function - CONTINENTAL EDISON CECP502RP Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Starting-up

You must first switching on the hob, then the heating zone:
Start-up/ switch off the hob :
Action
To start
Touch the key
Start-up/ switch off a heating zone :
Action
Zone selection
Increase power
Decrease power
Stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety.
The induction doesn't work:
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
If the pan is removed from the heating zone the operation is stopped. The display shows [
U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level setted before.

Residual heat indication

After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.

Booster function

The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones works during 5 minutes with an ultra high power.
The booster is foreseen for example to heat up rapidely big quantities of water, like nuddles cooking.
Start up / Stop the booster function :
Action
Zone selection
Increase power
Start up the booster
Stop the booster
Control panel
Press key [
]
Press key [
]
Control panel
Press selection key from the zone
Press key [ + ]
Press key [ - ]
Press key [ - ]
Control panel
Press selection key from the zone
Press key [ + ]
Press key [ + ]
Press key [ - ]
20
Display
2 x [ 0 ]
Nothing or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
[ 0 ]
[ 1 ] to [ 9 ]
[ P ] during 5 min
[ 9 ]

Publicité

Chapitres

Table des Matières
loading

Table des Matières