Twinny Load Swing C-XL Instructions De Montage Et Mode D'emploi page 33

Tighten the clamp.
Extra setting
The bicycles touch each other. The bicycle touches the lid of the boot.
The bicycle touches the lid of the boot: adjust the holder in such way that the bicycle doesn't
touch the lid of the boot.
The bicycles touch each other: adjust the holders in such way that both bicycles stand obliquely
outwards.
The handlebars touch the saddle of the other bicycle.
By adjusting the wheel rails in front and back a few cm, the bicycles will tilt slightly and no longer
touch each other.
Lock the clamp.
Place the second bicycle with
the handlebars to the right
and the left pedal downwards.
33