Twinny Load Swing C-XL Instructions De Montage Et Mode D'emploi page 32

Placing of bicycle
Slide out the wheel rails
halfway and tighten them.
Place the first bicycle in the
wheel rails closest to the car
with the handlebars to the left
and the pedal downwards.
Adjust the wheel rails in such
a way that the bicycle floats
approximately 1 cm above the
holder. Slide out = bicycle up;
slide in = bicycle down.
32
Loosen the straps and turn
them downwards.
Position the pedal arm in front of the holder. Hook the clamp
over the projecting steel lugs. Do not yet tighten it.
Fasten the straps.
Remove the clamp from
the holder.
Adjust the holder in such a
way that it rests against the
pedal arm and the bicycle is
upright.