Weber Summit 89795 Guide De L'utilisateur page 10

10
PROBLEM
Side Burner does not light.
Flame is low in "HI" position
Push button ignition does not work.
If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web
site. Log onto www.weber.com ® .
SIDE BURNER MAINTENANCE
WARNING: All gas controls and supply valves should be in
the "OFF" position.
Make sure black wire is connected between the igniter and electrode.
Make sure white wire is connected between the igniter and grounding clip.
Spark should be a white/blue color, not yellow.
1) Igniter Wire
SIDE BURNER TROUBLESHOOTING
CHECK
Is gas supply off?
Is the fuel hose bent or kinked?
Does burner light with a match?
2)
3)
Turn supply on.
Straighten hose.
If match lights burner, check igniter (see below).
Ground wire
Burner
Side Burner Grate
ner Grate
Side Burner cap
rner Cap
Side Burner Ring & Head
g & Head
Igniter Electrode
Electrode
Control Knob
trol Knob
Igniter
Igniter
CURE
(3)
WWW.WEBER.COM
®