Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Using the product

5.11. Ice-maker

(Optional)
Ice maker is located on the upper section of the
freezer cover.
Hold the handles on the sides of the ice stock
reservoir and move up to remove.
Remove the ice-maker decorative lid by moving
up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from the handles, then
move up and pull the ice stock reservoir. (Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir from the handles, move up
with an angle to fit the sides of the reservoir to their
slot and make sure that the ice selector pin is mounted
properly. (Figure 2)
Push downwards firmly, until there is no space left
between the reservoir and the door plastic. (Figure 2)
If you have difficulty in refitting the reservoir, turn the
rotary gear 90° and reinstall it as shown in the figure3.
Any sound you hear when the ice drops into the
reservoir is a part of normal operation.
20 / 28 EN
 
Refrigerator / User Guide

Publicité

Table des Matières
loading

Table des Matières