Hama Spirit Go Mode D'emploi page 6

5. Charging
Fully charge the earphones and the charging box once before using them for the first time .
1
Insert the earphones and connect the charging box
2
Charging procedure for the charging box and earphones
The status LEDs on the charging box (2) flash white . After the charging box is fully charged, the 4
LEDs on the charging box light up solid white .
The earphones are only charged when the charging box is closed .
It can take up to 1 .5 hours (earphones) or up to 3 hours (charging box) until the batteries are fully
charged .
Battery capacity
CHARGING
3
Charging box
100% – 75%
Earphones
When the battery is low (<25%), the announcement "Battery low" is heard .
The actual battery life will vary depending on how you use the device, the settings and the ambient
temperatures (rechargeable batteries have a limited life) .
Note
If you have not used the device for a few months, it can take up to 15 - 30 minutes until the
status LED (2) lights up during the charging process .
USB-C
3
:00
h m
1
:30
h m
75% – 50% 50% – 25%
Place the earphones in the charging
box . Ensure that the earphones are
inserted into the correct sides, using
the L/R markings as a guide .
Connect the USB-C charging cable
included to the charging socket (8) on
the charging box .
Connect the free plug on the USB-C
charging cable to a suitable USB
charger . To do this, consult the
operating instructions for the USB
charger you are using .
CHARGED
25% – 0%
4