Excell XC2600 Guide D'utilisation page 12

TO USE GATLING™ SPRAY
WAND
The nozzles for the spray wand are
stored in the gatling spray wand. See
chart to choose the correct nozzle for
the job to be performed.
CHANGING NOZZLES ON SPRAY
WAND
direct discharge stream toward
persons, unprotected skin, eyes or
any pets or animals. Serious injury
will occur.
attempt to change nozzles while
pressure washer is running. Turn
engine off before changing nozzles.
Spray Pattern
Uses
Surfaces *
*
washer is capable of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, and delicate objects such as
fl owers and shrubs. Before spraying, check the item to be cleaned to
assure yourself that it is strong enough to resist damage from the force
of the spray.
A20116
Risk of fl uid
injection. Do not
Risk of fl uid
injection. Do Not
0º
powerful intense
pinpoint for cleaning of
very intense small areas
cleaning
Metal or metal,
concrete concrete, or
DO NOT use wood
on wood
The high pressure spray from your pressure
1. Press turret release button to
release turret.
2. Rotate turret to chosen nozzle.
3. Push turret onto nozzle and lock
into place.
15º 40º
intense
cleaning of
larger areas
metal,
concrete, or
wood
12- ENG
Soap
applies
cleaning
solutions
metal,
concrete,
wood, or vinyl