all-clad NC00138680 Guide De L'utilisateur page 9

• After selecting the power setting and cooking time, press Start. You will hear a beep and cooking begins.The
readout indicates time left, the remaining time decreases by the minute.
HIGH/LOW MODE
The auto HIGH/LOW setting starts the cooking on HIGH and then switches to LOW:
• Press Set three times to select the HIGH/LOW setting.
• Enter the cooking time on the HIGH setting by pressing down or up.
• Press Start.
• Enter the cooking time on the LOW setting.
• Press Start again to confirm the time on the LOW setting and start the cooking.
DURING COOKING
• You can change the cooking time by pressing up or down.
• You can change the setting during cooking by pressing Set, on the HIGH or LOW settings only.
END OF COOKING
• When the cooking cycle is complete, the slow cooker will automatically shift to KEEP WARM mode.
• The WARM light illuminates.
• The KEEP WARM mode can be used for up to 6 hours.
• When the KEEP WARM mode is finished, the slow cooker will shut off.
• If you want to extend the KEEP WARM mode, push Power, press Set until the KEEP WARM mode appears
and press Start.
• DO NOT USE THIS FUNCTION TO REHEAT FOODS.
AFTER USE
• Press Power to turn off the slow cooker. The digital readout display 00:00 and light off after few seconds.
• Unplug your appliance.
EN
9