Publicité
Les langues disponibles
Les langues disponibles
Instructions for use
Unscrew the lock ring of the back grille (5) from the motor shaft (7) by
turning counter clockwise. Insert the back grille (6) on the motor shaft (7)
and fix it by screwing clockwise the lock ring of the back grille (5). Insert
the fan (4) on the motor shaft (7) and fix it by screwing counter clockwise
the lock ring of the fan (3). Open the clips of the front grille (2) and place
it on the back grille (6) making sure that the logo on the central stud is
placed horizontally, parallel with the floor. Find the proper position to lock
the clips and insert the safety screw of the grille (1).
Wall installation:
Fix the plate to the wall (11) by using the 3
screws and plugs provided (12).
Fix the fan on the wall's plate (11) making sure
that the flap fits into the fixing plate (9) on the
back of the fan.
After the installation, the product is ready to use. For your convenience
the unit can be operated by using control panel in the main body or using
remote control included.
19
Publicité
