Num'axes PIE1025 Guide D'utilisation page 26

7.4. TEST menu – parameters and settings list
You will find hereunder tables listing all of the parameters found in the TEST menu, along with
their possible settings (or range of settings), and a description of what the parameter controls
and what the settings do.
The default settings for each parameter are indicated in bold type.
Put the power switch in the TEST position then press MENU to enter into the setting menu.
Settings
Select language
Camera settings
Wireless setting
Camera settings:
Mode
Photo resolution
Video resolution
Series images
Video length
Beep sound
Set clock
# PIE1025 – indice B – Août 2018
Choose the language you need
Customize the camera settings
Set the parameters to send the photos
Camera, Video, Camera + Video
The camera has a sound recording function, so the sound will be
embedded in the video clips while capturing videos.
In "Camera + Video" mode a still photo and a video clip are both
captured for each trigger.
5M, 8M, 12M, 16M
Selects resolution for still photos from 5 to 16 megapixels. Higher
resolution produces better quality photos, but creates larger files that
take up more of the SD card capacity (fills up faster).
720P (1280x720 - HD), VGA (640x480), 1080P (1920x1080 – FHD)
Selects video resolution (in pixels per frame). Higher resolution
produces better quality videos, but creates larger files that take up
more of the SD card capacity (fills up faster).
1 Photo, 2 Photos, 3 Photos
Selects how may photos are taken in sequence per trigger in Camera
mode.
10 seconds, 20 seconds, 30 seconds, 60 seconds.
Sets length per captured video clip.
NOTE: You need to double the time interval from what your video is
set on. Example: 20 seconds video length, your trigger interval needs
to be at LEAST 40 seconds.
ON, OFF
You can choose to hear a beep sound or not when you press a key
Press OK to enter then use the  or  key to change the setting and
the  or  key to move to the next field. The date default format is
YY/MM/DD (year/month/day).To change the date format, press the
 key several times to highlight YY then press the  key to see the
available choices (YY/MM/DD, MM/DD/YY, DD/MM/YY).
The time format is hour:minute:second.
Description
26/88