Controls; Installation Methods; Lighting; Environment Concerns - Electrolux LFG517X Manuel D'utilisation

6 www.electrolux.com

4. CONTROLS

Models LFG525S, LFG525W, LFG525K,
DBL5236CN, DBL7036CN:
Switch A: LIGHT; position
tion : light on.
Switch B: MOTOR SPEED: makes it possible
to select the motor operating speed; position
0: motor off .
C: Motor on light.
Models LFG517X, LFG615K, LFG615W,
LFG615X:
Button P1: fi rst speed motor ON/OFF switch.
Button P2 (Models LFG615K, LFG615W,
LFG615X): Change motor speed (1-2-3-P-1-
2-3-P....). At fourth speed the letter on display
"P" is on (Booster). The 4th speed remain
active for 5 minuts then going back in 3th.
Button P2 (Model LFG517X): Change motor
speed (1-2-3-4-1-2-3-4....).
Button P3: Timer. Activate and deactivate
timer (5 minuts). If the timer is active, the
number correspondent at the speed fl ashing.
Button P4: Lights. Turns the lights on/off .
Button P1 + P4 : Filter Alarm Reset. When
display shown an "F" letter fl ashing, the
grease fi lters must be cleaned (40 hours of
operation). When display shown an "C" letter
fl ashing, the charcoal fi lters must be replaced
(160 hours of operation) and the grease fi lters
must be cleaned.
Obviously, if the hood is not a fi ltering model
and does not have a charcoal fi lters, clean
the grease fi lters both when display shown
"F" and when display shown "C". The fi lter
alarm can be seen when the motor is off and
for about 30 seconds. To RESET the hour
counter, keep simultaneously the buttons P1
and P4 pressed for 2 seconds while the alarm
can be seen.
: light off ; posi-
5. INSTALLATION
METHODS
FILTERING OR DUCTING VERSION ?
The hood may be in fi ltering or in ducting
version. Decide from the outset which type is
to be installed.
For better effi ciency, we recommend installing
the hood in the ducting version (if possible).
Ducting version
The hood purifi es the air and evacuates it to
the outside through an exhaust duct.
Filtering version
The hood purifi es the air and recycles the
clean air back into the room.

6. LIGHTING

If the light spot is damaged, it must be re-
placed only by the manufacturer, its service
agent or similarly qualifi ed persons in order to
avoid a hazard.
7. ENVIRONMENTAL
CONCERNS
Recycle materials with the symbol
Put the packaging in relevant containers
to recycle it. Help protect the environment and
human health by recycling waste of electrical
and electronic appliances. Do not dispose of
appliances marked with the symbol
with the household waste.
Return the product to your local recycling
facility or contact your municipal offi ce.
.