Beko WITV8712 XW0 Manuel D'utilisation page 8

4.1.6 Adjusting the feet
A
CAUTION:
on its feet. Balance the machine by adjusting the feet. Otherwise, the product may move from its place and cause crushing
and vibration problems.
CAUTION:
1 Loosen the lock nuts on the feet by hand.
2 Adjust the feet until the product stands in a stable and balanced way.
3. Tighten all lock nuts by hand again.
Adjusting the feet with water level
• You must remove the Detergent Drawer to set the Water Level.
• For the system to operate properly, the bubble inside the Water Level must be in the middle.
• If the bubble inside the Water Level is on the left, the pre-set right foot of the Washing Machine must be
adjusted.
• If the bubble inside the Water Level is on the right, the pre-set left foot of the Washing Machine must be
adjusted.
• If the bubble inside the Water Level is at the back, the pre-set front feet of the Washing Machine must be
turned to the left (clockwise).
• If the bubble inside the Water Level is at the front, the pre-set front feet of the Washing Machine must be
turned to the right (anti-clockwise).
8 / EN
In order to ensure that the product operates more silently and vibration-free, it must stand level and balanced
Do not use any tools to loosen the lock nuts. Otherwise, they will get damaged.
Washing Machine / User's Manual