TEMPUR-PEDIC 19005-38.80-3370 Manuel Du Propriétaire page 6

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

safety precautions and usage statements
duty cycle. Attempting to circumvent or exceed this rating will shorten the life
expectancy of the product and may void the warranty.
The massage motors are not designed to operate continuously for more
that 30 minutes at a time. Please allow the massaging system to rest for 30
minutes after automatic massage shut off before restarting.
Weight Limits:
The recommended weight limits on the TEMPUR-PEDIC ERGO EXTEND
SLEEPTRACKER
SYSTEM are:
®
Twin Long / Queen / King / Split CA King / CA King: 850 pounds.
Maximum weight the bed can support per person is 350 pounds with the
weight evenly distributed across the head and foot sections. This product
is not designed to support or lift this amount of weight in the head or foot
sections alone. NOTE: Exceeding the recommended weight restrictions could
damage your TEMPUR-PEDIC ERGO EXTEND
and void your warranty. For best performance, you should enter and exit the
TEMPUR-PEDIC ERGO EXTEND
flat or fully lowered position.
TEMPUR-PEDIC ERGO EXTEND
inside bed frames, furniture beds and platform beds that are certified to
hold a minimum of 1000 pounds. If using this adjustable base without
the legs and placing directly on a bed frame or platform bed, cross-bed
supports (slats) are strongly recommended to ensure TEMPUR-PEDIC ERGO
EXTEND
+ SLEEPTRACKER
TM
Acoustics:
In normal base operation the wheels, which allow the bed to maintain its
distance from the wall, will make contact with the steel platform supports of
Exceeding this weight restriction could damage the bed
and/or cause injury and will void the warranty.
the base creating a contact noise. When entering, exiting or shifting weight
on the base, this contact noise may be audible as the wheels make contact.
This is normal.
2
+ SLEEPTRACKER
TM
+ SLEEPTRACKER
SYSTEM while it is in the
TM
®
+ SLEEPTRACKER
SYSTEM fits easily
TM
®
SYSTEM maintains stability during operation.
®
Fabric Care:
To prolong the life of your fabric, protect from direct sunlight whenever
possible. For spot cleaning, wipe area with a light damp sponge or vacuum
with a soft brush attachment to remove particles. Keep at a minimum of
30cm (12 inches) away from direct heat sources.
For deeper cleaning, blot liquid spills with a clean dry cloth. Wipe with a clean
cloth dampened with warm water. Do not wet excessively. A soft bristle brush
+
TM
may be used to remove ingrained soil. Avoid scratching by gentle brushing.
Wipe with a clean cloth dampened with warm water to remove residues after
brushing. Dry in shade away from direct heat.
If persistent marks remain visible after cleaning, seek professional advice.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation
SYSTEM
®
is subject to the following two conditions: (1) This device may
not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
To comply with the FCC RF exposure compliance requirements,
no change to the antenna or the device is permitted. Any change
to the antenna or the device could result in the device exceeding
the RF exposure requirements and void user's authority to
operate the device.
CAN ICES-3 (B)/NMB-3(B)
Tempur-Pedic
Sleeptracker
®
For Tempur-Pedic Ergo Extend™
System Components
Sleeptracker Sleep Monitoring System Model STS-40:
- One Sleeptracker Processor Units
- One or two Sleeptracker Sensors*
System
®

Publicité

Table des Matières
loading

Table des Matières