TEMPUR-PEDIC 19005-38.80-3370 Manuel Du Propriétaire page 14

KING/CAL KING SETUP (Not for TXL x 2 Split King)
Always use two people when setting up the base.
(2) Long Bolts
STEP 1
Push and align the head and foot sections together. Make
sure to align the leg thread holes with top frame as seen in
Fig. A and side hole as seen in Fig. B.
10
(2) Wing Nuts
(2) Washers
Fig. A Fig. B
STEP 2
Once aligned, slide long bolt through the side hole shown
in Fig. C and Fig. D. Secure bolt using one of the washers
and wing nuts provided. Repeat this step for the other
side of the base.
Fig. C
STEP 3
Attach the legs by screwing them into the leg threads.
Do this on all four corners and both sides of the middle
section.
Fig. E
To install King/Cal King Headboard Brackets (sold
separately) see instructions on page 18.
Fig. D
Fig. F