Bosch SHP7PT55UC Notice D'utilisation page 37

TimeLight
®
(Optical display while the
wash cycle is running) *
* optional feature which may or may
not be included with your dishwasher
While wash cycle is running, an
optical display (additional cycle
information) is indicated on the floor
under the appliance door. If the base
panel is pulled forwards or if the
appliance is installed at eye-level with
flush furniture front, the display is not
visible.
This feature has three settings:
†:‹‹ Optical display is switched
off.
†:‹‚ Time remaining and cycle
progress is displayed
alternating with the Bosch
logo (about 5 seconds per
image).
†:‹ƒ Like †:‹‚. Additional wash
cycle options are displayed.
Operating the Dishwasher en-us
All time remaining displays
!
®
To change the setting:
Open the door.
1.
Press On/Off button (.
2.
Hold down function key # and
3.
press Start button P until the
display 8 indicates •:x (x can
be any number).
Release both buttons.
4.
The indicator of function key #
flashes and the display 8
indicates the factory set value
•:‹...
Press function key # until the
5.
display 8 indicates the factory
set value †:‹‚.
Press function key 3 to switch
6.
between †:‹‹, †:‹‚ and †:‹ƒ.
Press Start button P to save
7.
setting.
Bosch logo
®
Pre-rinse
Cleaning
Rinsing
Drying
37