Epson WorkForce Pro WP-4530 Guide Rapide page 27

3. If documents are still jammed, raise the ADF input tray and carefully remove the
jammed pages.
Faxing Problems
■
Make sure the recipient's fax machine is turned on and working.
■
Make sure the
that the telephone wall jack works by connecting a phone to it.
■
Make sure the
■
If you use a voicemail service, you should turn off Auto Answer. Otherwise, calls or
faxes may be inadvertently received by your voicemail.
■
If the line has static, press
Communication
■
If the product is connected to a DSL phone line, you must have a DSL filter
connected to the phone jack. Contact your DSL provider for the filter.
■
If you connected a telephone or answering machine, make sure it is connected to the
port. Do not use a phone line splitter.
EXT.
Print Quality Problems
■
Make sure your paper is loaded printable side down (usually the whiter or brighter
side) in the cassette (or printable side up in the rear MP tray).
■
For the best print quality, use Epson papers (see page 3) and genuine Epson ink
cartridges (see page 21).
■
Make sure the paper type setting on the control panel or in your printer software
matches the type of paper loaded in the printer (see page 9).
■
If you notice light or dark bands across your printouts or they are too faint, run a
nozzle check (see page 18) to see if the print head needs cleaning.
■
If you notice jagged vertical lines, you may need to align the print head. See the online
User's Guide for instructions.
port on the product is connected to a telephone wall jack. Verify
LINE
light is turned on to receive faxes automatically.
, then select
Setup
. Turn off the
V.34
Fax Settings
and (Error Correction Mode) settings.
ECM
, and then
Problems and Solutions
27