Epson WorkForce Pro WP-4530 Guide Rapide page 21

Replacing Ink Cartridges
Make sure you have a new ink cartridge before you begin.
Caution: Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Leave the expended cartridge installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
1. Turn on the product.
2. If an ink cartridge is expended, you see a message on
the LCD screen. Note which cartridges need to be
replaced and press
If a cartridge is expended, you must replace it to be
able to print. If a cartridge is low, you can continue
printing until a cartridge needs replacement.
3. Open the front cover.
4. Push in the ink cartridge that you want to replace, then pull it out as shown.
Warning: If ink gets on your hands, wash them thoroughly with soap and water. If
ink gets into your eyes, flush them immediately with water. Keep ink cartridges out
of the reach of children and don't drink the ink.
5. Remove the new cartridge from its package.
Caution: Do not remove any other labels or seals, or ink will leak. Do not touch the
green chip on the side of the cartridge. This can damage the ink cartridge.
.
OK
Replacing Ink Cartridges
21