Zanussi ZBB 6297 Mode D'emploi page 66

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Fix cover (Hd) on guide (Hb) until it clips into place.
If the appliance is fixed to the side of the kitchen
unit, simply slacken the screws in the fixing brackets
(E), move the brackets as shown in the figure and
re-tighten the screws.
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet. If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit perfectly to
the cabinet. In that case, wait for the natural
fitting of the gasket or accelerate this process by
heating up the part involved with a normal
hairdrier.
66
Hb
Hd
PR167/1
E
E
D735

Publicité

Table des Matières
loading

Table des Matières