Disposal; Packaging; Disconnection; Customer Service - Franke FHMF 604 3G DC C Manuel D'utilisation

EN

DISPOSAL

Packaging

All packaging materials (cardboard, plastic film (PE)
and polystyrene (EPS)) are marked and should, if
possible, be collected for recycling and disposed of in an
environmentally friendly way.

Disconnection

Disconnect the appliance from the mains. With a
X X
fixed appliance, this must be carried out by a qualified
.
electrician
Disposal
The symbol on the product or on the
packaging indicates that the device must not
be disposed of in the domestic waste.
By disposing of the device in a proper way you help to
avoid harmful consequences to environment and health.
Further information about recycling the device is available
from the competent authority, the local refuse disposal
service or the vendor of the device.

CUSTOMER SERVICE

Refer to the contact address for your country on the
X X
back page or on our website: www.franke.com
FHMF 604 3G DC C / FHMF 604 4G C / FHMF 755 4 G DC C
– 10 –
Dispose of the device, which is to be discarded, via a
Z X
specialised waste collection point for electronic and
electrical devices.
In accordance with the Directive 2012/19/EU, regarding
the reduction of the hazardous substances used in
electrical and electronic appliances, and waste disposal.
The barred dustbin symbol on the appliance indicates
that at the end of its working life the product must not be
disposed of as household waste.
Consequently, when the appliance has reached the end
of its working life the user must take it to a suitable
recycling centre for electronic and electrotechnical
waste, or return it to the dealer when purchasing a new
appliance of equivalent type.
Proper separate waste collection of the scrapped appliance
for subsequent recycling, treatment and environmentally-
friendly disposal helps prevent a potentially negative impact
on the environment and health and facilitates recycling of
the materials used in appliance construction.