Philips HR1942 Mode D'emploi page 10

ENGLISH
12
Problem
The juicing unit cannot
be placed onto the
motor unit.
The juicing unit is
blocked.
The power-on light
flashes. (HR1942,
HR1943, HR1944,
HR1946, HR1947,
HR1949 only)
Solution
Check if the spout is properly attached to the juicing
unit. Make sure that the projections on the juicing unit
are aligned with the recesses in the motor unit (see
fig. 9).
Press the pre-clean button for a few seconds. If the
juicing unit is still blocked, then switch off the appliance,
remove the juicing unit and disassemble all parts.
Remove the fruit that is blocking the juicing unit. Then
process a smaller quantity.
The juicing unit is blocked. Press the pre-clean button
for a few seconds. If the juicing unit is still blocked, then
switch off the appliance, remove the juicing unit and
disassemble all parts. Remove the fruit that is blocking
the juicing unit. Then process a smaller quantity.