Installing The Wall Bracket; Changing Batteries - Becker Centronic Easycontrol EC41 1 Notice De Montage Et D'utilisation

Installing the wall bracket

Caution
If mounted in a switch box, the latter must be empty.
Prior to installation, the power supply must be disconnected.
The applicable regulations for electrical installation must be
complied with.
58,9
You will find the appropriate battery type in the "Technical
data" chapter.
2.
18 - en

Changing batteries

1.
2.
3.
1.
4.
5.
• Before installation in the de-
sired installation position,
check that the transmitter and
receiver are functioning prop-
erly.
• Fix the bracket to the wall with
the two screws enclosed.
Remove the control panel.
Open the battery compartment.
Take out the battery.
Insert the new battery correctly.
Close the battery compart-
ment.