Hoover DYM 893/T Mode D'emploi page 40

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

The lower basket is fitted with a special
adjustable central rack (fig. 3 and 4).
This permits stable and optimum
loading, even when the size and/or
shape of the dishes is non-standard.
- POSITION "A": for a standard load, or
one that excludes pans, salad bowls and
the like.
- POSITION "B": for dishes which,
although standard size, have a particular
shape (very deep bowls, square dishes
or ones without borders etc.).
- POSITION "C": for larger than average
flat plates and/or ones with non-
standard shapes (square, hexagonal,
oval, pizza dishes etc.).
3
4
C
Smaller plates (used for dessert plates
for example), can also be placed into the
lower basket as shown in the figure 5,
with the support flap placed outwards
("B").
For normal or large plates the flap must
be in the position ("A").
WARNING!
If the small plates are placed in the
basket with the support flap in the
incorrect position, the plates will
interfere with the lower spraying arm
preventing it to rotate.
B
A
A
5
A
A standard daily load is represented in
fig. 6.
Lower basket (fig. 6)
6
Please load the dishwasher sensibly to
ensure the best wash results.
IMPORTANT
The lower basket has a
device, for its safe extraction, also
especially useful with a full load.
For loading salt, cleaning filter and for
ordinary maintenance, the complete
extraction of the basket is necessary.
Cutlery basket
The top of cutlery basket can be removed,
for enable various loading options.
40
B
safety-stop

Publicité

Chapitres

Table des Matières
loading

Table des Matières