Beurer ELLE HLE 30 Mode D'emploi page 12

• When used on wet skin, it is important that the skin is sufficiently damp so that the device
can glide optimally over the skin. Shower gel or soap facilitates the shaving process.
• Do not use creams/lotions containing alcohol before or after using the shaver.
• In order to avoid irritation, do not press the shaver head too firmly onto the skin.
• Thoroughly clean the shaver head before shaving. This reduces the risk of infection as far as
is possible.
• Press the on/off button to switch on the device.
• The LED light ensures optimal lighting conditions so that you can see and remove the finest
hairs.
• Hold the skin taught with your free hand, to raise the hair.
• Use the device slowly, steadily and without pressure with the illuminated side against the di-
rection of hair growth. As hair doesn't always grow in one direction, it can be useful to move
the device in various directions over the skin to achieve an optimal result.
Using the spacer combs
Using the spacer combs, you can cut your hair to two different lengths:
• Small spacer comb 4mm
• Large spacer comb 8mm
• Position the comb you wish to use on the shaver head such that the teeth of the comb face
outward on the illuminated side.
• Switch the device on and always move the device against the direction of hair growth.
• Ensure that the comb surface always remains in contact with the skin.
5. care and storage
WARNING
• Disconnect the device before cleaning it.
• Only clean the appliance in the manner specified. Fluid must never be allowed to enter
into the device or accessories.
• To clean the shaver head, press the unlock buttons on the removable shaving foil and
disconnect this from the device.
• Additionally, the shaver blades can be removed from the shaver head and cleaned under
running water. Before cleaning the shaver head in this manner, hair can be removed
from the device using the cleaning brush.
• Every six months, oil the shaver foil and trimmer with a drop of sewing machine oil.
• Do not use the device again until it is completely dry.
• Do not clean the device in the dishwasher.
• Do not use aggressive cleaning agents or hard brushes.
First unplug the device and allow it to cool off. Then you can clean it with a soft, slightly
moistened cloth. Then wipe it dry with a soft, lint-free cloth.
12