Télécharger Imprimer la page

Beurer ELLE HLE 30 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Ensure that the charger, the plug and the cable do not come into contact with water or
other liquids. Therefore, use the charger in the following conditions:
• only in dry inside rooms
• only with dry hands
• never in the bath, in the shower or near a filled basin
• never in swimming pools, whirlpools or in the sauna
• never out in the open
Never reach for a charger that has been submerged in water. Disconnect it from the
mains immediately.
WARNING : Repairs
• Repairs to electrical appliances must only be carried out by qualified persons.
Incorrect repairs can lead to considerable danger for the user. In the event of repairs,
please contact our customer service or an authorised dealer.
• If the power supply unit or its cord is damaged, it must be replaced by an authorised
dealer.
• To order replacement parts (removable shaving foil, removable shaving blades), please
refer to the enclosed service address list.
WARNING: Fire hazard
There is a risk of fire if the device is used incorrectly or if it is not used according to these
operating instructions.
For this reason, the massage device must only be operated as follows:
• Never leave the device unsupervised, particularly if children are around.
• Never use the device under covers, such as blankets or pillows.
• Never use the device in the vicinity of petrol or other easily flammable materials.
cAUTION: Disposal
Follow local regulations regarding the disposal of materials. The appliance should
be disposed of according to Regulation 2002/96/EC-WEEE (Waste Electrical and
Electronic Equipment). In case of queries, contact the municipal authorities re-
sponsible for waste disposal in your area.
Remove the battery before disposing of the device at an official recycling point. Before
removing the battery, disconnect the device from the charger and wait until the motor
comes to a complete stop. Remove the front cover using a screwdriver and loosen the
screws underneath. Finally, disconnect the battery. Dispose of the used battery at a coll-
ection point.
10

Publicité

loading