Manual Mode; Auto-Mix Color Mode; Dmx-Controlled Operation; Addressing The Projector - EuroLite AC-300 Air-Effect Mode D'emploi

Masquer les pouces Voir aussi pour AC-300 Air-Effect:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Sound Control: Slide-switch on SOUND, color changes are sound-controlled.
Auto-Change: Slide-switch on AUTO, automatic color change. The rotary speed control can be used in the
Auto-Change Mode.

Manual Mode

To select Manual Mode set dipswitches 7 and 8 to ON.
Dipswitch 1 and 2 control the brightness of the „R" LEDs.
Dipswitch 3 and 4 control the brightness of the „G" LEDs.
Dipswitch 5 and 6 control the brightness of the „B" LEDs.

Auto-Mix Color Mode

In order to select Auto-Mix Color Mode, set dipswitch 8 to ON and dipswitch 7 to OFF.
Speed (increasing) can be controlled by setting the dipswitches 1 - 6 to ON.

DMX-CONTROLLED OPERATION

You can control the projectors individually via your DMX-controller. Every DMX-channel has a different
occupation with different features.

Addressing the Projector

Set the dipswitch 8 to OFF. At least 1 dipswitch (from 1 – 7) must be set on ON.
Dipswitches 1 – 7 set the DMX addresses.
Set the slide-switch on SOUND.
Controlling:
After having addressed all AC-300 DMX LED/RGB Air Effects, you may now start operating these via your
lighting controller.
20/41
Brightness Settings
off/off 00 ≙ 0%
on/off 10 ≙ 25%
off/on 01 ≙ 50%
on/on 11 ≙ 100%
51116120_V_1_1.DOC

Publicité

Table des Matières
loading

Table des Matières