Technics ST-G30L Manuel D'utilisation page 19

To a household AC
outlet
3
AC power supply cord (supplied)
¢ Insert the AC power supply cord up to a point just before the round hole.
1 Connect the device with a built-in USB-DAC.
This unit will output audio signals, allowing you
to play back music files.
≥ See the operating instructions for connected
equipment for operational details.
≥ The USB connection is not required for the
playback of music using the DLNA function.
2 Wired LAN connection
Normally, just connecting a LAN cable will
complete the setup.
≥ Use category 7 or above straight LAN cables
(STP) when connecting to peripheral devices.
3 AC power supply cord connection
Connect only after all other connections are
completed.
Note
お知らせ お知らせ
≥ This unit consumes a small amount of AC
power (
mode. Remove the plug from the main electrical
outlet if you will not be using the unit for an
extended period of time. Place the unit so the
plug can be easily removed.
¢
≥ While the AC power supply cord is disconnected,
the LAN cable must be connected or
disconnected.
≥ Inserting any cable other than a LAN cable in the
LAN port can damage the unit.
27) even when the unit is in standby
Connections 19
(19)